9 Simple Ways To Fix Dell Preparing Automatic Repair

dell preparing automatic repair

If you are stuck on the Dell preparing automatic repair screen then you need to read this article. There’s no need to panic, because this is quite a common issue with a lot of solutions on the web. In this guide, we’ve compiled the best and simplest solutions to get your computer back up and running.

From simple restarts to a bit more complex methods, you’ll be equipped with a range of options to troubleshoot and fix this never-ending loop on your Dell computer or laptop. Let’s dive in!

In Simple Terms, What Causes This Problem?

The preparing automatic repair loop screen typically arises on Dell computers due to software glitches, corrupted system files, hardware failures, or even improper shutdowns.

In essence, when your computer’s operating system encounters a problem it can’t resolve during startup, it triggers the ‘Automatic Repair’ tool in an attempt to diagnose and fix the issue.

Unfortunately, sometimes this tool can get stuck in a loop, leaving your computer in a state of limbo, unable to boot up fully.

First try restarting your computer again, if it doesn’t work then you can try these other methods below.

The Easiest Way To Fix Dell Preparing Automatic Repair

If you want to save your time, I recommend just doing this solution instead of messing around with all the other possible fixes.

Reinstalling the Windows operating system is often the most effective way of resolving the “Preparing Automatic Repair” issue. This method involves installing a fresh copy of the operating system, which will effectively eliminate any problematic system files or glitches causing the issue.

However, reinstalling Windows comes with a significant caveat – it will erase all the existing data on your computer. Therefore, before proceeding with this remedy, it is crucial to back up all important files, documents, or software. You can use an external hard drive, a USB drive, or cloud-based storage like Microsoft OneDrive or Google Drive for this purpose.

Remember, while this method has a high success rate in resolving the issue, it should ideally be used as a last resort, when all other troubleshooting methods have failed. It’s always best to attempt less drastic solutions first, before opting to reinstall Windows.

Restart and Enter Safe Mode

One practical method involves booting your computer in Safe Mode. To do this, restart your computer, and as it begins to boot, press the F8 key repeatedly. For some Dell computers, you might need to press Shift + F8 instead. This will lead you to a screen with several options, from which you should select ‘Safe Mode’.

Safe Mode is a diagnostic mode in Windows, which starts your computer with a minimal set of drivers and services. No third-party software or drivers are loaded, and even the built-in Windows stuff is limited to just what’s necessary.

This makes Safe Mode incredibly useful for troubleshooting and fixing issues like the “Preparing Automatic Repair” loop. Once your computer successfully boots up in Safe Mode, you can then proceed to investigate the issue further, identify the problematic factor, and apply the necessary fixes.

Boot from a Windows Installation Disk or Recovery USB Drive

Another potential solution is to restart your computer and boot from a Windows installation disk or recovery USB drive. To do this, insert the installation disk or recovery USB into your computer and then restart the system. As it begins to boot, you will need to press a specific key (often F12 or DEL, depending on your system) to enter the boot menu.

Here, you will need to select your Windows installation disk or recovery USB drive as the boot device. Once the system boots from the selected device, you’ll encounter a screen asking you to select your language preferences. After setting your preferences, click “Next.”

In the following screen, instead of proceeding with a fresh installation, click on the “Repair your computer” option located at the bottom left of the screen. From the options displayed, choose “Troubleshoot” then “Advanced options” and finally “Startup Repair.” This process will automatically repair any issues causing the “Preparing Automatic Repair” loop. After the repair process finishes, your system should be able to boot up normally.

Perform a System Restore

A preferred solution to break the “Preparing Automatic Repair” loop is to perform a System Restore.

This process returns your system to a previous point before the issue started, effectively undoing any recent changes that might have caused the problem. This can be done by booting your computer from a Windows installation disk or recovery USB drive.

To perform a System Restore:

  1. Insert your Windows installation disk or recovery USB drive into your computer and restart the system.
  2. Press the appropriate key (often F12 or DEL, depending on your system) during boot to access the boot menu.
  3. In the boot menu, select your Windows installation disk or recovery USB as the boot device.
  4. Upon booting, select your language preferences and click “Next.”
  5. Choose the “Repair your computer” option located at the bottom left of the screen.
  6. From the options displayed, navigate to “Troubleshoot” > “Advanced options” > “System Restore.”
  7. Follow the on-screen prompts to select a restore point before the issue started and initiate the restore process.

After the System Restore is complete, your computer should be able to boot up normally, bypassing the “Preparing Automatic Repair” loop.

Check Disk for Errors

You can also check your disk for errors to break the “Preparing Automatic Repair” loop.

  1. First, you’ll need your Windows installation disk or a recovery USB drive. Insert this into your computer.
  2. Restart your computer, and while it’s booting up, press the right key (usually F12 or DEL) to open the boot menu.
  3. Once you’re in the boot menu, you should choose to boot from your Windows installation disk or recovery USB.
  4. After your computer boots up, you’ll see some language options. Pick what you need and click “Next.”
  5. You’ll see an option that says “Repair your computer”—click on that.
  6. You will then see some more options. Navigate through them like this: “Troubleshoot” > “Advanced options” > “Command Prompt.”
  7. When you’re in the Command Prompt, type exactly this: chkdsk /f /r C: then press Enter.

This process will start checking your disk for errors and automatically fix any issues it finds. After it’s done, your computer should be able to start up normally.

Perform a Disk Cleanup

  1. To start, restart your computer and press the F8 key repeatedly until the “Advanced Boot Options” menu appears. Choose “Safe Mode” from the list and hit Enter to boot into Safe Mode.
  2. Once you’ve logged in, press the Windows key + R to open the “Run” dialogue box. Type in “cleanmgr” and press Enter. This will open the Disk Cleanup utility.
  3. In the Disk Cleanup window, select the drive you want to clean up (usually C:) and click “OK”.
  4. The utility will calculate the amount of space that can be freed up. Check the boxes for “Temporary Files”, “System Cache”, and any other unnecessary files you want to remove, then click on “OK” and finally “Delete Files”.

This process will remove unnecessary temporary files and system cache that may be causing the Automatic Repair loop. After the cleanup, restart your computer normally and check if the issue has been resolved.

Disable Automatic Repair Loop

For Dell users, disabling the Automatic Repair Loop is a straightforward process that involves using your Windows installation disk or recovery USB drive.

  1. Start your Dell computer and boot from the Windows installation disk or recovery USB drive.
  2. Navigate to the “Troubleshoot” > “Advanced options” menu where you can access the Command Prompt.
  3. Once you’re in the Command Prompt, you need to type a specific command: `bcdedit /set {default} recoveryenabled No`. Make sure to type it exactly as it is and then press Enter.

This process stops your Dell computer from automatically trying to repair itself when it encounters an issue, which can sometimes cause a loop of unsuccessful repair attempts. After following these steps, your Dell machine should boot up normally.

Check Hardware

Sometimes, hardware problems can be the culprit causing issues with your Dell computer. Things like damaged RAM or a failing hard drive can cause your computer to act up. Inspect these components carefully. If you find any component to be faulty, replacing it might solve the issue. In simpler terms, think of your Dell computer like a car.

If a part of the car is broken, it won’t run properly. Similarly, if a part of your computer is damaged, it may cause problems.

So, check your computer’s ‘parts’ (the hardware like RAM and hard drive), and if anything isn’t working right, you might need to get a new ‘part’ (replace the faulty hardware) to get your computer running smoothly again.

Boot into Safe Mode and Update Device Drivers

In some cases, you might need to boot your Dell computer into Safe Mode to fix the issue. Think of Safe Mode as a secure, stripped-down version of your computer system, where it only runs the most necessary programs.

To access this, restart your Dell computer and as it boots up, press the ‘F8’ key on your keyboard. Select ‘Safe Mode’ from the options that appear.

While in Safe Mode, you should update all your device drivers. These are like translators between your computer’s hardware and the software. They ensure that all the parts of your computer can ‘talk’ to each other properly. Specific drivers, such as those for disk drives, display adapters, and processors are vital for your computer to operate correctly. If they’re outdated, they might not be able to ‘communicate’ effectively with the rest of the system, potentially causing issues.

Updating these drivers is like teaching these ‘translators’ a new language or updating their existing language skills, helping them communicate more effectively.

To do this, you can go to the ‘Device Manager’ on your Dell computer, find the drivers that need updating, right-click on them, and select ‘Update Driver’. After updating, restart your Dell computer in normal mode. If it boots up without any problems, this could have been your solution.

Conclusion

In conclusion, dealing with the ‘Dell preparing automatic repair’ issue can be simplified by adopting a methodical approach. Whether it involves replacing faulty hardware, updating device drivers, or booting into safe mode, each step is crucial to restore your Dell computer to optimal functionality.

Remember, these methods not only rectify existing issues but also enhance the overall performance of your system. These are not one-time solutions, but practices you should regularly engage in to ensure the longevity and efficiency of your Dell computer.

Periodic updates and checks can prevent potential issues from turning into significant problems, ensuring your digital experience remains smooth and uninterrupted.

With over 12 years of experience with laptops, Grayson Uppington has delved deep into the tech world, always learning and sharing. His top pick is the Lenovo Legion Slim 5, blending performance with style. Formerly a pro gamer in CS:GO, those tournaments sharpened his skills and heightened his appreciation for laptop potential.